Soft operation of PP non-woven fabric

　　During the processing of PP non-woven fabrics, due to the influence of chemical adhesives, additives or low-temperature drying, it will trigger rough and stiff hand feelings, which limits the operation of non-woven fabrics on certain scales. Many sanitary and protective non-woven products, such as sanitary napkin fabrics and all kinds of clean sassafras wipes, require PP non-woven fabrics to have good flexibility, so it is necessary to perform soft cleaning of non-woven sanitary materials, and often operate weaving net machinery And chemical preparation.

　　Mechanical kneading and soft liquidation

　　If the mechanical twisting and soft settlement master kneads or shortens the non-woven fabric through the process, the rigidity of the non-woven fabric is reduced to achieve the principle of softness. This kind of soft wheel settlement mainly has two mechanical processing systems, namely, the Krapac method and the Michaelis method. .

　　1. Krapac method

　　Klapak method is operated on papermaking property, and then transplanted into wet-laid nonwoven fabric, which is pre-shrinked and liquidated by imitating Sanfrai machine. In the following figure, after processing, the non-woven fabric can obtain excellent flexibility and improve the feel. The settlement of the law depends on the thickness, elasticity, fiber characteristics, pressure, fiber web structure, and thermal and humid conditions of the rubber belt.

　　2. Mike Rex method

　　The Mike Rex method is very strong in squeezing pp non-woven fabrics. Therefore, the non-woven fabrics are roughly crepe. The delay of the non-woven fabrics increases the unit area component and the approximate product. Compared with the Parker method, this weaving better improves the flexibility of the non-woven fabric. The crepe effect of the Mike Rex method can be tested and evaluated by measuring the increase in cell area or the elongation of non-woven fabric through the process optical technique. Therefore, the settlement of the law largely depends on the size of the crepe area and the input and output speed of pp non-woven fabrics.